BaByliss Pro Ultra Curl Styler 25mm

FEATURES

• EP TECHNOLOGY 25mm Plates
• Advanced Heat Management System™: Immediate heat-up
• Temperature Selector: 3 settings (170°C – 200°C – 230°C)
• On/Off Switch
• Temperature Indicator Lights
• Professional 2.70m Swivel Cord
• Energy Saving
• Eco-friendly 40W
• Size: (L) 312x(W)30.5x(H)80mm

Advanced Heat Management™ System

The styler integrates the latest self-regulating heating element, providing accurate and continuous electronic temperature control. This technology ensures immediate heat-up, high temperatures, temperature stability to the nearest half degree, and quick reaction and recovery times.

Perfect Results

• The hi-tech heating element offers even heat distribution across the plates.
• The three indicator lights blink until the tool reaches the selected temperature.
• Temperature control ranges from 170°C to 230°C, suitable for all hair types from the most fragile to the most coarse.
  • Perfect straightening for all hair types, including natural hair extensions and ethnic hair.
  • Optimized curl creation with temperatures between 170°C and 200°C, depending on hair type.

Floating 25mm EP TECHNOLOGY 5.0 Plates

• Absorb pressure perfectly, allowing for smooth and even gliding along the entire hair section.
• Ensures consistent pressure regardless of hair thickness.
• During curling, the hair glides through the plates, smoothing the entire section, while the curved plates create the curl.

HOW TO USE

• Switching On: Plug the appliance into a suitable mains socket and push the (0/I) slider switch to turn the unit on the lowest setting (170°C).
• Temperature Settings: Push the slider switch again to select either 200°C or 230°C.
• Caution: Avoid contact with hot surfaces, especially on the skin, eyes, ears, face, and neck.
• Temperature Selection: Slide the switch using the symbols as a guide:
  • 230°C
  • 200°C
  • 170°C
  • OFF
• Heat Settings: Use lower heat settings for fine or colored hair; higher settings for thicker hair. Each indicator light blinks until the unit reaches the selected temperature.

CREATING CURLS

1. Prepare Hair: Separate a section of hair, ideally no more than 3.5 cm wide.
2. Position Hair: Place the hair into the unit at the roots, with the side curved cooling plates facing towards the head, and close the plates.
3. Curling Motion: Turn the unit 90° so the curved curling plates face upwards. Hold the hair firmly between the plates, using the easy grip cool tips for control.
4. Glide and Curl: Slowly glide the unit down the hair from root to tip in an outward curved motion. By the time the unit reaches the ends, the cooling plates should face down.
5. Finishing: Release the unit and turn the end of the section through 180° to set the curl. Repeat as needed.
6. Alternative Use: Alternatively, place the hair into the unit at the roots, turn the unit 90° so the plates face downwards, and glide in an inward curved motion. Turn the end of the section through 180°.

Temperature Guide

• Green: Delicate, thin hair - Creating curls at 170°C
• Orange: Average hair - Creating curls at 200°C
• Red: Thick, frizzy, or ethnic hair - Straightening at 230°C
• Use lower temperatures (170°C or 200°C) for curling; use 230°C only if hair needs straightening before curling.

AFTER USE

• Turning Off: Push the switch to (0/I) to turn off and unplug the appliance.
• Cooling: Allow the unit to cool before storing.
• Auto Shut-Off: If unused for about 72 minutes, the auto shut-off feature will turn the unit off for safety and longevity.

MAINTENANCE

• Cleaning: Unplug the unit and let it cool completely. Clean the plates with a soft, damp cloth without detergent. Avoid scratching the plates to preserve quality.

WARRANTY POLICY

Warranty is valid for 6 months from delivery date. The warranty covers replacement of quality defects of the appliance due to materials or manufacturing.

PAYMENT POLICY FOR ELECTRONICS
Credit Card, Bank Deposit, GCash, Over-the-Counter options. All payment methods except COD. COD is not allowed for electronics.

SHIPPING POLICY FOR STYLING TOOLS
Please expect delivery within 3 to 6 working days in Metro Manila, within 4 to 7 working days to provinces.

{{ product.metafields.hmnl.product_faqs_tab_description | metafield_tag }}